
Msn: sales_edison@hotmail.com
Msn: sales_edison@hotmail.comYou are here : Home > Products > Extruder > Two-stage Planetary Extruder
two-step planetary extruder has an out-standing capability in mass production of many different plastic materials. It fixes the screw in the center of the extruder, and then matches several small screws to from the planetary extruder. It enables the best compound and distribution effect because it can perform at a rather low temperature in the space between screws. Therefore it can keep the original characteristics of material.

Main Technical Parameter
Mode |
WEl50-170 |
WEl90 |
WE240 |
DIAM of main barrel |
156 |
190 |
240 |
Qty of main screw |
1 |
1 |
1 |
Qty of planetary |
9 |
10 |
10 |
Material |
38CrMoALA |
38CrMoALA |
38CrMoALA |
Main motor |
Z4 series DC:132KW DC speed control |
Z4 series DC:185KW DC speed control |
Z4 series DC:250KW DC speed control |
Feeding motor |
AC:1.5KW |
AC:1.5KW |
AC:1.5KW |
Gearbox |
Hard gear surface accuracy:6 |
Hard gear surface accuracy:6 |
Hard gear surface accuracy:6 |
Heating device |
1 oil heater |
2 oil heater |
2 oil heater |
Output(kg/h) |
700-1000 |
1000-1500 |
1500-2000 |
Dimension(mm) |
3300x1700x 2300 |
3800x1700x 2500 |
4000x 2200x 3000 |
Home > Products > Extruder > Single-Screw-Extruder
Home > Products > Extruder > Twin-Screw-Extruder
Home > Products > Extruder > Parallel Twin-screw Extruder
Home > Products > Extruder > series conical twin-screw extruder
Home > Products > Extruder > Two-stage Planetary Extruder